Engraved pipe tags

Rigid engraved plastic tags that strap to the pipe with cable ties, hang from chain or stick on. Pick the service and the pipe size: the color comes from CAN/CGSB-24.3 or ASME A13.1, and the letter height and length from the pipe’s outside diameter, insulation included. The flow arrow is engraved.

Pipe
Flow
Color scheme

Loading the tag engine…

Your pipe tags

Valve tags already in your order stay in it.

Letter height and length by pipe size

Set from the outside diameter of the pipe or its insulation. The tag is at least the color-field length and grows to fit the words, up to 23½″. Online we make tags for up to 6⅝″ outside diameter; bigger pipe takes a 24″ or 32″ tag, made to quote.

Outside diameterLettersShortest color fieldExampleEach
Under ¾″ OD¼″tag4.4″ × 0.67″ tag$5.70
¾″ – 1¼″ OD½″8″8″ × 0.92″ tag$9.12
1½″ – 2″ OD¾″8″11.4″ × 1.38″ tag$27.36
2½″ – 6″ OD1¼″12″18.5″ × 2.3″ tag$64.98
8″ – 10″ OD2½″24″quoted—
Over 10″ OD3½″32″quoted—

Examples are domestic cold water tags on steel pipe without insulation. Copper tube is smaller outside than steel pipe of the same size, so pick the pipe material in the tool.

Engraved tags, not wrap-around markers

These are rigid engraved plastic tags, the same material as our valve tags: the letters are cut through the colored face to the core, so there is no print to wear off. They suit mechanical rooms, ceiling spaces and anywhere a tag gets handled.

We don’t make wrap-around vinyl pipe markers or snap-on markers.

Fixing

  • Cable-tie slots at each end: a tie goes round the pipe or insulation.
  • Two holes for chain, S-hooks or screws.
  • Adhesive back for a clean, flat or large pipe.

Colors

CAN/CGSB-24.3, the Canadian scheme, is withdrawn but still cited in many specifications; ASME A13.1 is the US scheme. The two group some services differently — heating water is yellow in CGSB 24.3 and green in ASME A13.1 — so pick the scheme your specification names. See color codes by service.

Pipe tags for 2″ pipe, CAN/CGSB-24.3 colors.

Pipe tags and valve tags, one order

Add your pipe tags here and your valve tags in the builder; they check out together.

Questions

How long is a pipe tag?
It depends on the pipe’s outside diameter, insulation included: an 8″ color field with ½″ or ¾″ letters for small pipe, 12″ with 1¼″ letters for 2½″ to 6″ outside diameter. The tool shows the exact size and price.
Can I use ASME A13.1 colors instead of CGSB 24.3?
Yes. Choose the scheme in the tool; the colors change to match.
Do you make pipe markers for large pipe?
Pipe over 6⅝″ outside diameter needs a 24″ or 32″ tag. We quote those; email the pipe list.